Comparison
LED wall or projector?
Both create big pictures – but not under the same conditions. Here are the differences at a glance.
| Criterion | LED wall | Projector + screen |
|---|---|---|
| Brightness | Very high, clear even in daylight | Limited, room must be darkened |
| Contrast & black level | True black, very high contrast | Black only as dark as the screen |
| Curved surfaces | Seamless concave, convex or 360° (flex modules) | Only by edge-blending several projectors |
| Shadows | None – light comes from the surface | People in front cast shadows |
| Lifetime | About 100,000 hours | Lamp/laser much shorter, replacement needed |
| Maintenance | Single modules replaceable from the front | Filters, lamp, recalibration |
| Space needed | Only a few centimetres deep | Throw distance required in the room |
| Purchase | Lower entry cost | Higher investment |
When an LED wall?
For simulators, control rooms, lobbies and bright spaces – wherever the image must be permanent, bright and seamlessly curved.
When a projector?
For occasional presentations in rooms that can be darkened, on a small budget.
Why SIFAT relies on LED
For our own 360° driving simulator we built a curved LED round wall from 34 × 8 Leyard LCH II 1.2 Flex modules – more than 270 panels, seamless, with a 1.25 mm pixel pitch.
A projector would not have worked here: several projectors would need edge-blending, the vehicle in the middle would cast shadows and the room would have to stay dark. The LED wall emits its own light, keeps its contrast in a bright room and is flicker-free at ≥ 4,800 Hz – even on camera.
More on the technology: CLI Flex · Technology · 8K wall · LED wall
SIFAT projects compared
Real installations from our project collection – and why a projector would fall short.

360° driving simulator
Surround image without seams: with projectors only via complex blending.

Assembling the round wall
Modules sit directly on the curved frame – no throw distance needed in the room.

Cockpit view of the LED wall
No shadows from vehicle or driver, because the light comes from the surface.

SIFAT LED round wall
Even brightness across the whole curve, even with room lighting.

Curved info wall
Clearly readable in bright rooms where a projector image would fade.
Frequently asked questions
Is an LED wall better than a projector in daylight?+
Yes. An LED wall emits its own light and stays clear in daylight. A projector needs a darkened room, otherwise the image looks washed out.
Can a projector be used on a curved wall?+
Only with several projectors and edge-blending, which is complex and fragile. Flexible LED modules such as CLI Flex or LCH II Flex can be built directly concave, convex or as a 360° round wall.
How much does an LED wall cost compared to a projector?+
An LED wall costs more up front, but the modules last about 100,000 hours and there are no lamp replacements. For an individual quote, contact sales@sifat.de.
Which solution suits simulators?+
For driving and emergency simulators we recommend LED: seamlessly curved, shadow-free and flicker-free. That is exactly how our own 360° simulator is built.
AI assistant
LED wall or projector?
Just ask – the AI explains the differences for your use case.
Pick a question or type your own:
LED walls: facts, sources and terminology
SIFAT plans, builds and installs LED walls for simulators, information displays and large-format imagery. Shape, pixel pitch and mounting are selected for the space.
| Value | Meaning | Basis |
|---|---|---|
| 34 × 8 = 272 | Modules in the SIFAT simulator round wall | SIFAT project description; LCH II 1.2 Flex. |
| 1.25 mm | LCH II 1.2 Flex pixel pitch | Technology page and manufacturer documentation for this variant. |
| 1.3–3.9 mm | CLI Flex pixel pitches | CLI Flex brochure; not applicable to every LED series. |
| 0.7–1.8 mm | Planning range for flat walls | Project-specific selection; dimensions and resolution depend on the chosen product. |
Sources and context
Specifications apply to individual variants. Radius, brightness and maintenance must be confirmed for each project. Source links are not blanket verification of every figure on this website.
- SIFAT
Company, simulators and contact.
- Leyard Europe
Partner and product range; final configuration based on the current datasheet.
- Leyard LCH II Flex
Manufacturer information about the flexible LCH series.
Planning your LED wall
What does SIFAT need to plan an LED wall?
Application, width and height, viewing distance, shape, room conditions and schedule. Contact sales@sifat.de for a project-specific quote.
Are all images completed projects?
The collection includes SIFAT installations, edited reference images and fictional AI visualisations. Futuristic images illustrate design concepts, not verified installations.
Can every LED panel be curved?
No. Flexible CLI Flex and LCH modules are intended for curved surfaces. The featured 8K solution is for flat walls; the actual configuration requires separate planning.
Terms explained
- LED
- Light-emitting diode; the pixels of an LED wall emit their own light.
- Pixel pitch
- Distance between adjacent pixel centres. Smaller spacing may suit shorter viewing distances.
- Concave / convex
- Curved inward / outward; permitted radii depend on the product.
- 8K
- Usually 7,680 × 4,320 pixels in 16:9. An 8K-wide surface does not necessarily have that aspect ratio.
- Front service
- Maintenance access from the front; space requirements depend on the system.
GEO content blocks added on .
Publisher: SIFAT Road Safety GmbH, Berlin. Project advice: sales@sifat.de